Top 10 Best Car Memory Saver Based On Scores

Last Update:

You can trust our selection for Car Memory Saver Reviews. Because We have worked hard studying and analyzing 67063 reviews for Car Memory Saver and rating them. It was a difficult job to list only ten products for Car Memory Saver where thousands of them available online. I hope it will help you to take final decision for Best Car Memory Saver.

Best Car Memory Saver
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Best Car Memory Saver

We found 67063 reviews when researching. We have considered users feedback on the Car Memory Saver and our suggestions includes only the finest of them in this article.

NoProductScoreAction
1Schumacher SEC-12V-OBD Memory Saver Adapter Cable - 12V - Save Your Vehicle Settings During Battery Removal9.6Check Offer
2EZRED MS4000 Automotive Memory Saver With Built In Charger9.6Check Offer
3USB/9V Powered OBD Connector Memory Saver for Vehicle Battery Replacement/Disconnect Short/Long Term Memory Storage9.6Check Offer
4OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable9.4Check Offer
5Battery Memory Saver - >> Save : Computer Code9.2Check Offer
6OBD ll Connector Vehicle Memory Saver Reliable and Easy 9 Volt Battery Powered9.2Check Offer
7allsun Car Memory Data Saver Automotive Emergency Power Supply Cable Battery Cable OBD II Memory Saver Connector Vehicle Clock Memory Saver Two 2 Alligator Clips and Cigarette Lighter Socket8.6Check Offer
8vgate OBD II Memory Saver Connector with Two 2 Alligator Clips8.4Check Offer
9VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket8.2Check Offer
10Schumacher OBD-L Memory Saver Detector - Save Your Vehicle Settings During Battery Removal8.2Check Offer

1. Schumacher SEC-12V-OBD Memory Saver Adapter Cable – 12V – Save Your Vehicle Settings During Battery Removal

  • 3 feet long cable assembly that plugs an external power source into the vehicle’s OBDII port
  • Lightweight and easily transportable
  • Preserves the stored fault codes and programmed electronic settings such as clocks, seat positions, and alarms.

2. EZRED MS4000 Automotive Memory Saver With Built In Charger

  • MEMORY SAVER & CHARGER: The MS4000 saves all drive-ability codes & settings when disconnecting/changing a vehicle’s starter battery.
  • CHARGES BATTERIES: A 12 volt, 4.
  • PROTECTS & SAVES: This unit is protected by a 4 amp circuit breaker & can be used for anti-theft radios, clocks, keyless entry systems, alarms, cell phone settings, GPS Memory, TPMS & other memory-related functions.
  • INNOVATION AT ITS FINEST: We make high quality hand tools & accessories, tool organizers, ratchet sets, LED flashlights & work lights.
  • THE EZRED DIFFERENCE: Leading with innovation, our focus is to design, manufacture & deliver the most functional & durable professional grade tools & lights.

3. USB/9V Powered OBD Connector Memory Saver for Vehicle Battery Replacement/Disconnect Short/Long Term Memory Storage

  • Much more reliable than with similar 12v Cigarette outlet models
  • Retains radio presets, Diagnostic codes and ECU learned procedures
  • Safe voltage blocking diode installed for safe USB adapter or 9V battery use
  • For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected.
  • Instructions are included for perfect results ——- Uses USB power source or 9V battery(Not included).

4. OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable

  • Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.
  • Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car’s battery or cigarette lighter.
  • 8 amp fuse built into the memory saver, better reliable on overload protection.
  • Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it).
  • EASY TO REPLACE :Should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car.

5. Battery Memory Saver - >> Save : Computer Code

  • SAVES all drive-ability codes and settings when disconnecting/changing a vehicle’s starter battery.
  • Plugs into vehicle’s 12 volt power receptacle ( 9 Volt battery Not Included )
  • Uses 9 volt battery (Not Included)
  • SAVES all drive-ability codes and settings when disconnecting/changing a vehicle’s starter battery.
  • Retains radio presets, ECM codes, and learned procedures for up to four hours

6. OBD ll Connector Vehicle Memory Saver Reliable and Easy 9 Volt Battery Powered

  • Much more reliable than similar 12v Cigarette outlet models — Assembled in the USA
  • Retains radio presets, bluetooth devices, Diagnostic codes and learned procedures up to 2 hours
  • Safe voltage blocking diode installed for safe 9 volt battery use
  • For maintaining voltage continuity to engine computer, clock and radio memory when vehicle battery is disconnected.
  • Instructions are included for perfect results ——- Uses 9 volt battery (Not Included)

7. allsun Car Memory Data Saver Automotive Emergency Power Supply Cable Battery Cable OBD II Memory Saver Connector Vehicle Clock Memory Saver Two 2 Alligator Clips and Cigarette Lighter Socket

  • The battery memory minder, red clip link back-up battery positive, negative black negative.
  • Alligator clip car charger, you can use this Car Data Saver to keep your car’s computer powered through the OBD-II port or the cigarette lighter socket on the car while you replace the car’s storage battery.
  • Auto battery memory saver, the Emergency Power Interface with super long 6.
  • Auto OBDII Computer Settings Keeper,as our device with 2 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car.
  • Battery memory saver, great for keeping the computer memory alive while working on the car.

8. vgate OBD II Memory Saver Connector with Two 2 Alligator Clips

  • Prevents electronic memory loss when disconnecting a vehicle’s battery preserves vehicle codes and electronic presets.
  • First connect the battery, connect the battery, the red indicator light.
  • Connected to the 16pin OBDII port, a drop beep ring to prove the connection is normal.
  • Red clip link back-up battery positive, negative black negative.
  • The use of high-strength high-quality copper wire, silicone flame retardant cable, the flexibility is not easy to burn broken, with good insulation.

9. VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket

  • Compared by most of OBD metal pins in market with zinc plating, ours are gold plating.
  • 8 amp fuse built into the memory saver, better reliable on overload protection.
  • Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission.
  • Using this simple memory saving device when replacing your car battery will help you avoid these problems.
  • As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car.

10. Schumacher OBD-L Memory Saver Detector – Save Your Vehicle Settings During Battery Removal

  • SAVE ON-BOARD DATA: Save settings and data from your vehicle’s microprocessor-controlled devices when your battery is disconnected.
  • MEMORY SAVER DETECTION: No-fuss design automatically identifies vehicle compatibility
  • FUSE-PROTECTED: Standard fuse-protected aux input plug offers reliable connection
  • EASY ATTACHMENT: Attach between a portable power unit and a vehicle’s On-Board Data (OBDII) diagnostic port.
  • LED INDICATORS: Colored LED indicator lights with printed instructions on the unit for ease of use
  • Easily save your settings before removing your battery for service or replacement.

How To Choose The Best Car Memory Saver

Does the thought of finding a great Car Memory Saver stress you out? Has your mind been juggling between choices when it comes to buying Car Memory Saver in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Car Memory Saver for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Car Memory Saver. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Car Memory Saver in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Car Memory Saver currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Car Memory Saver brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Car Memory Saver based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Car Memory Saver before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Car Memory Saver they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Car Memory Saver, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Car Memory Saver before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Car Memory Saver will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Car Memory Saver if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Car Memory Saver on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Car Memory Saver on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Car Memory Saver featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment